A cheap dolly for your GoPro (incl. video)

How to make a dolly for a few bucks…

The solutions is pretty simple!


– Two skateboard trucks, with their 8 screws and nuts (you should have 4 “big nuts with nil-stop” for the wheels and 8 smaller with nil-stop too for the trucks)

– 8 spacer (small!!!)

– 4 inline wheels with the best ball bearing you can find. Wheels have to be quite soft, to minimize the noise and vibrations

– 1 tool used by the plasterers to put mortars or plaster on the walls (if you’ve got the right name, feel free to put it in the comment section below)

– 1 screwdriver and a drilling machine


1. Drill 8 holes in the plasterers tool exactly as they are setup on the skateboard trucks, 4 on each side of the handle (see picture that will be added in a near future…) Please note that the wheels trucks shall be put as apart as possible…

2. Insert 8 screws.

3. Insert the spacer on each screw and put the smaller nuts in place. Tighten all these nuts.

4. Unscrew the biggest nut you will find on the truck axis.

5. Rotate the two trucks by 180 degrees.

6. Put back in place the “biggest nuts”. (tighten quite well, you do not want the truck to move freely)

7. Put the wheels in place, and tighten the “wheel nuts”. (not too much: the rule is tighten until the wheel can just not roll free, then unscrew a quarter of turn (90 degrees))

8. Put your GoPro seat post or roll bar system on the handle (depending on the diameter of the handle).

9. Put the GoPro Camera in place.

10. Go filming horizontal translations, straight or in curved trajectories, even circling around an object! Please note that it works best on smooth surfaces.

As I have readers that might well be willing to try to build this, please do this at your own risks, I am not liable to any accident, injuries or death caused by the dolly, its manufacturing or its use… 😉


Here is a video I just made: my GoPro Hero (with its wireless video link for FPV attached) is filmed by my Hero 2 which is filmed by my Canon Ixus 130 on a small Manfrotto tripod.

[wpvideo 1GbSEgXE]

Time-lapses examples

As you already know, the GoPro Camera is also great for creating time-lapse videos…

You will find below some examples of Time-lapse I made using:

My GoPro Camera (usually shooting once every two seconds)
Directly connected to a tripod
Or with an egg-timer in-between
Apple MacBook Pro (2011) 17′
Quicktime Pro to render the video @25 fps.

No music, just pictures concatenated…  😉

The videos are displayed in the following order: Oldest first.

[youtube=http://www.youtube.com/watch?v=juPt_tPD5U0] (Dubai, UAE)

[youtube=http://www.youtube.com/watch?v=djI9L05aVFo] (Dubai, UAE)

[youtube=http://www.youtube.com/watch?v=ORR7RTuiFhQ] (Geneva, Switzerland)

Others will follow.

Mr. G.

Some simple videos

On this page I will post links to the various videos I made with my GoPro camera…

(nothing extreme!)

Stay tuned!


Dubai, UAE

Near Geneva, Switzerland. TURN THE SOUND OFF!
I had a problem with the GoPro firmware update!

The Raving Rabbid Launch


More to come.


Mr. G.